Loading...

Women's Warm and Safe Heated Base Layer Heated Hands inc Controller

CODE: wsbase3


Price: £224.95

2250 points

Minimum quantity for "Women's Warm and Safe Heated Base Layer Heated Hands inc Controller" is 1.

These new base layers from Warm and Safe really are a game changer

W&S have always kept to the original principals with heated clothing, like manufacturing liners that actually fit under your jackets/trousers etc, ensuring that not only are they usable but provide the most possible heat and greatest convenience.

Now comes the Base Layers, designed to allow practical use not only from a 6.8-18v power  source such as a motorcycle but also from an optional battery.

The problem with trying to run traditional liners from a portable battery was the power consumption was so high that battery size was completely impractical, but not now, W&S have solved this by creating a body hugging, form fitting base layer, as it sits so close against your skin there is very little heat loss and so requires less power, this system runs on 7.4v and is supplied with a controller which allows it to be powered from a 6.8-18v source, alternatively you can select one of the battery options which allows mobile use, even with the smaller battery (5.2ah) you will get around 4 hours heating depending on battery condition/charge and setting with the 7.8ah battery it's around 6 hours, these batteries are very small and light and come supplied with your chosen charger and a pouch with belt clip and short (26cm) extension cable

 

The supplied controller consists of the wireless head unit, velcro pads, a tiny receiver, a 64cm conversion/extension adaptor cable and a fused motorcycle/vehicle battery connection cable

 

"We have been working on this for a few years. There are many people that need to stay warm off the bike but with a limited power supply, we had to design the Heated Layer to work with a 7.4 volt battery. We had to balance heat and time and weight. The greater the voltage, the greater the weight of the battery for the amps you need because as you increase voltage you increase the need for more amps. More amps, again, more weight. Then to get good heat with a battery that you can carry, you need to focus the heat. But then if you try to use more voltage, such as a car or motorcycle or a power supply off the main power, you get too much heat. We have solved that problem with our new Heated Layer Heat-troller. With this new controller, you can run the Heated Layer from 6.8 volts to 18 volts."

 

See the size chart image above by clicking on "View larger image" and scrolling through the images

 

if you want to power it off the car power port or a BMW/Hella/Triumph socket then order this dual purpose adaptor cable:

Cigarette/Accessory/BMW-Hella Cable

 

If you want you can also use this Heated Layer with our 7.4Volt battery. Just select the battery you want. NOTE: these batteries do not have built in controllers because you already have the Multi-Voltage Controller supplied with the Base Layer. Depending on your selection, you get one of the following. 

 

7.4V 5.2A Battery, Belt Pouch, Ext Cable & Euro Plug Charger

7.4V 5.2A Battery, Belt Pouch, Ext Cable & UK/US/World Plugs Charger

7.4V 7.8A Battery, Belt Pouch, Ext Cable & Euro Plug Charger

7.4V 7.8A Battery, Belt Pouch, Ext Cable & UK/US/World Plugs Charger

The Heated Layer has 10 areas of heat. The chest, side of the chest, upper arms, neck, hands and lower back. 

With our new Heated Layer Heat-troller, it can take power from our 7.4volt battery or a 12volt source, from 6.8 volts to 18 volts with only a designed increase in watts.